|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
INTEGRATED CIRCUITS 74ABT2952 Octal registered transceiver (3-State) Product specification Supersedes data of 1995 Jun 15 IC23 Data Handbook 1998 Feb 11 Philips Semiconductors Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 FEATURES * 8-bit registered transceiver * Independent registers for A and B buses * Output capability: +64mA/-32mA * Latch-up protection exceeds 500mA per JEDEC Std 17 * ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per Machine Model DESCRIPTION The 74ABT2952 high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT2952 device is an 8-bit registered transceiver. Two 8-bit back-to-back registers store data flowing in both directions between two bidirectional buses. Data applied to the inputs is entered and stored on the rising edge of the Clock (CPXX) provided that the Clock Enable (CEXX) is Low. The data is then present at the 3-State output buffers, but is only accessible when the Output Enable (OEXX) is Low. Data flow from A inputs to B outputs is the same as for B inputs to A outputs. * Power-up 3-State * Power-up reset * Live insertion/extraction permitted QUICK REFERENCE DATA SYMBOL tPLH tPHL CIN CI/O ICCZ PARAMETER Propagation delay CPBA to An or CPAB to Bn Input capacitance I/O capacitance Total supply current CONDITIONS Tamb = 25C; GND = 0V CL = 50pF; VCC = 5V VI = 0V or VCC Outputs disabled; VO = 0V or VCC Outputs disabled; VCC =5.5V TYPICAL UNIT 5.7 4 7 110 ns pF pF A ORDERING INFORMATION PACKAGES 24-Pin Plastic DIP 24-Pin plastic SO 24-Pin Plastic SSOP Type II 24-Pin Plastic TSSOP Type I TEMPERATURE RANGE -40C to +85C -40C to +85C -40C to +85C -40C to +85C OUTSIDE NORTH AMERICA 74ABT2952 N 74ABT2952 D 74ABT2952 DB 74ABT2952 PW NORTH AMERICA 74ABT2952 N 74ABT2952 D 74ABT2952 DB 7ABT2952PW DH DWG NUMBER SOT222-1 SOT137-1 SOT340-1 SOT355-1 PIN CONFIGURATION B7 B6 B5 B4 B3 B2 B1 B0 OEAB 1 2 3 4 5 6 7 8 9 24 23 22 21 20 19 18 17 16 15 14 13 VCC A7 A6 A5 A4 A3 A2 A1 A0 OEBA CPBA CEBA PIN DESCRIPTION PIN NUMBER 10, 14 11, 13 16, 17, 18, 19, 20, 21, 22, 23 1, 2, 3, 4, 5, 6, 7, 8 9, 15 12 24 SYMBOL CPAB / CPBA CEAB / CEBA A0 - A7 NAME AND FUNCTION Clock input A to B / Clock input B to A Clock enable input A to B / Clock enable input B to A Data inputs/outputs (A side) B0 - B7 OEAB / OEBA GND VCC Data outputs/outputs (B side) Output enable inputs Ground (0V) Positive supply voltage CPAB 10 CEAB 11 GND 12 SA00114 1998 Feb 11 2 853-1554 18949 Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 LOGIC SYMBOL 16 17 18 19 20 21 22 23 FUNCTION TABLE for Register An or Bn INPUTS An or Bn X L H CPXX X CEXX H L L INTERNAL Q NC L H OPERATING MODE Hold data Load data A0 A1 A2 A3 A4 A5 A6 A7 10 11 14 13 CPAB CEAB CPBA CEBA B0 B1 B2 B3 B4 B5 B6 B7 OEBA OEAB 15 9 H = High voltage level L = Low voltage level = Low-to-High transition X = Don't care XX = AB or BA NC= No change 8 7 6 5 4 3 2 1 SA00115 FUNCTION TABLE for Output Enable INPUTS OEXX H INTERNAL Q X L H An or Bn OUTPUTS Z L H OPERATING MODE Disable outputs Enable outputs LOGIC SYMBOL (IEEE/IEC) 11 13 15 9 10 14 EN1 EN2 EN3 EN4 C5 C6 L L H = High voltage level L = Low voltage level X = Don't care XX = AB or BA Z = High impedance "off " state 1, 4, 5 8 7 6 5 4 3 2 1 16 17 18 19 20 21 22 23 2, 3, 6 SA00116 ABSOLUTE MAXIMUM RATINGS1, 2 SYMBOL VCC IIK VI IOK VOUT IOUT Tstg PARAMETER DC supply voltage DC input diode current DC input voltage3 VO < 0 output in Off or High state output in Low state VI < 0 CONDITIONS RATING -0.5 to +7.0 -18 -1.2 to +7.0 -50 -0.5 to +5.5 128 -65 to 150 UNIT V mA V mA V mA C DC output diode current DC output voltage3 DC output current Storage temperature range NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 1998 Feb 11 3 Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 LOGIC DIAGRAM CEAB 11 CPAB OEAB 10 9 DETAIL A CE A0 16 D CP Q Q CE D CP 8 B0 A1 A2 A3 A4 A5 A6 A7 17 18 19 20 21 22 23 DETAIL A X 7 7 6 5 4 3 2 1 B1 B2 B3 B4 B5 B6 B7 CEBA 13 CPBA OEBA 14 15 SA00117 RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL VCC VI VIH VIL IOH IOL t/v Tamb 1998 Feb 11 DC supply voltage Input voltage High-level input voltage Low-level Input voltage High-level output current Low-level output current Input transition rise or fall rate Operating free-air temperature range 4 0 -40 PARAMETER Min 4.5 0 2.0 0.8 -32 64 10 +85 Max 5.5 VCC V V V V mA mA ns/V C UNIT Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25C Min VIK Input clamp voltage VCC = 4.5V; IIK = -18mA VCC = 4.5V; IOH = -3mA; VI = VIL or VIH VOH High-level output voltage VCC = 5.0V; IOH = -3mA; VI = VIL or VIH VCC = 4.5V; IOH = -32mA; VI = VIL or VIH VOL VRST II Low-level output voltage Power-up output low voltage3 Input leakage current IOFF IPU/IPD IOZH IOZL ICEX IO ICCH ICCL ICCZ ICC Additional supply current per input pin2 Quiescent supply current Control pins Data pins VCC = 4.5V; IOL = 64mA; VI = VIL or VIH VCC = 5.5V; IO = 1mA; VI = GND or VCC VCC = 5.5V; VI = GND or 5.5V VCC = 5.5V; VI = GND or 5.5V VCC = 0.0V; VO = 4.5V; VI = 0.0V or 5.5V VCC = 2.1V; VO = 0.5V; VI = GND or VCC; VOE = Don't care VCC = 5.5V; VO = 2.7V; VI = VIL or VIH VCC = 5.5V; VO = 0.5V; VI = VIL or VIH VCC = 5.5V; VO = 5.5V; VI = GND or VCC VCC = 5.5V; VO = 2.5V VCC = 5.5V; Outputs High, VI = GND or VCC VCC = 5.5V; Outputs Low, VI = GND or VCC VCC = 5.5V; Outputs 3-State; VI = GND or VCC VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND -50 2.5 3.0 2.0 Typ -0.9 3.5 4.0 2.6 0.42 0.13 0.01 5 5.0 5.0 5.0 -5.0 5.0 -80 110 20 110 0.3 0.55 0.55 1.0 100 100 50 50 -50 50 -180 250 30 250 1.5 -50 Max -1.2 2.5 3.0 2.0 0.55 0.55 1.0 100 100 50 50 -50 50 -180 250 30 250 1.5 Tamb = -40C to +85C Min Max -1.2 V V V V V V A A A A A A A mA A mA A mA UNIT Power-off leakage current Power-up/down 3-State output current4 3-State output High current 3-State output Low current Output High leakage current Output current1 NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. 4. This parameter is valid for any VCC between 0V and 2.1V, with a transition time of up to 10msec. From VCC = 2.1V to VCC = 5V 10% a transition time of up to 100sec is permitted. AC CHARACTERISTICS GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500 LIMITS SYMBOL PARAMETER WAVEFORM Min fMAX tPLH tPHL tPZH tPZL tPHZ tPLZ 1998 Feb 11 Maximum clock frequency Propagation delay CPBA to An, CPAB to Bn Output enable time OEBA to An, OEAB to Bn Output disable time OEBA to An, OEAB to Bn 1 1 3 4 3 4 5 150 2.0 2.5 1.0 2.2 2.0 1.5 Tamb = +25C VCC = +5.0V Typ 250 3.2 3.8 3.2 4.4 3.6 2.8 6.6 7.2 4.8 6.2 7.6 7.1 Max Tamb = -40C to +85C VCC = +5.0V 0.5V Min 150 2.0 2.5 1.0 2.2 2.0 1.5 7.6 8.2 5.8 7.5 8.1 7.6 Max MHz ns ns ns UNIT Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 AC SETUP REQUIREMENTS LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25C VCC = +5.0V Min tS(H) ts(L) th(H) th(L) ts(H) ts(L) th(H) th(L) tw(H) tw(L) Setup time An to CPAB or Bn to CPBA Hold time An to CPAB or Bn to CPBA Setup time CEAB to CPAB, CEBA to CPBA Hold time CEAB to CPAB, CEBA to CPBA CPAB or CPBA pulse width, High or Low 2 2 2 2 1 4.5 3.5 0.0 0.0 4.0 3.0 0.0 0.0 3.0 3.5 Typ 2.2 1.6 -0.8 -1.4 0.8 0.8 -0.7 -0.7 0.8 0.9 Tamb = -40C to +85C VCC = +5.0V 0.5V Min 4.5 3.5 0.0 0.0 4.0 3.0 0.0 0.0 3.0 3.5 ns ns ns ns ns UNIT AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V 1/fMAX CPBA or CPAB OEAB, OEBA VM tPZH tPLH VM VM VM tPHZ VOH An, Bn VM VOH -0.3V 0V VM tw(H) tPHL VM tw(L) VM An or Bn SA00087 SA00119 Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Width, and Maximum Clock Frequency Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level An, Bn CEAB, CEBA CPAB, CPBA TEST CIRCUIT AND WAVEFORMS 1998 Feb 11 EEE E EEEEEEEEE EEE E EEEEEEEEE EEE EEEEEEE EEE VM VM VM VM ts(H) th(H) ts(L) th(L) VM VM OEAB, OEBA VM tPZL VM tPLZ An, Bn VM VOL +0.3V VOL SA00118 SA00120 Waveform 2. Data Setup and Hold Times Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level 6 Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 7V From Output Under Test CL = 50 pF 500 S1 Open GND 500 Load Circuit TEST tpd tPLZ/tPZL tPHZ/tPZH S1 open 7V open DEFINITIONS Load capacitance includes jig and probe capacitance; CL = see AC CHARACTERISTICS for value. SA00012 1998 Feb 11 7 Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 DIP24: plastic dual in-line package; 24 leads (300 mil) SOT222-1 1998 Feb 11 8 Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1 1998 Feb 11 9 Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm SOT340-1 1998 Feb 11 10 Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 TSSOP24: plastic thin shrink small outline package; 24 leads; body width 4.4 mm SOT355-1 1998 Feb 11 11 Philips Semiconductors Product specification Octal registered transceiver (3-State) 74ABT2952 Data sheet status Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 05-96 9397-750-03479 Philips Semiconductors yyyy mmm dd 12 |
Price & Availability of 74ABT2952 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |